Peças

Não são necessárias peças.

  1. Make sure the laptop is turned off and unplugged before starting.
    • Make sure the laptop is turned off and unplugged before starting.

    • Unscrew the thirteen 10mm screws on the back of the computer using the Phillips #0 screwdriver.

    • Using the spudger or other prying tool, gently pry the back off of the device.

    • Be sure not to pry too hard as it may result in snapping the back plate.

    Adicionar comentário

  2. Unscrew the two 5mm battery screws using the Phillips #0 screwdriver.
    • Unscrew the two 5mm battery screws using the Phillips #0 screwdriver.

    Adicionar comentário

    • Gently lift the battery up and away from the hooks on the bottom of the device keeping the battery in place.

    • Be sure the battery is away from the clips before pulling away so as not to break the clips.

    Adicionar comentário

    • Detach the connecting cable from the motherboard by pulling away.

    • Remove the battery from the device.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Jacob Kahn

Member since: 17-10-2017

273 reputação

2 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Todo: 73