Ir para o conteúdo principal
  1. Shut down the laptop and disconnect the power cord.
    • Shut down the laptop and disconnect the power cord.

    • Failing to disconnect or shut down the laptop could result in damage to the laptop or a shock hazard.

    • Turn the laptop over.

  2. Remove seven 10 mm T7 screws. Remove four 6 mm T7 screws. Use the blue plastic opening tool to carefully remove both rubber pads which cover the four remaining screws.
    • Remove seven 10 mm T7 screws.

    • Remove four 6 mm T7 screws.

    • Use the blue plastic opening tool to carefully remove both rubber pads which cover the four remaining screws.

    • Remove the remaining four 10 mm T7 screws.

  3. Carefully lift the cover upwards.
    • Carefully lift the cover upwards.

    • If the cover seems stuck, use a spudger tool to pry the sides.

  4. Locate the WiFi Card antenna wires Remove both antenna wires from the WiFi card by prying upwards with the spudger tool
    • Locate the WiFi Card antenna wires

    • Remove both antenna wires from the WiFi card by prying upwards with the spudger tool

  5. Remove the (1) 3.5mm #00 Phillips retaining screw
    • Remove the (1) 3.5mm #00 Phillips retaining screw

    • Once the screw is removed, the spring loaded hinge will tilt the WiFi card up

  6. With the retaining screw removed, pull the WiFi card out of the socket
    • With the retaining screw removed, pull the WiFi card out of the socket

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Andrew Rodiek

Membro desde: 13/01/2015

598 Reputação

4 Guias de autoria

Equipe

USF Tampa, Team 3-4, Hickman Winter 2015 Membro de USF Tampa, Team 3-4, Hickman Winter 2015

USFT-HICKMAN-W15S3G4

4 Membros

7 Guias de autoria

2 comentários

The factory wi fi card is so weak. Is there a better wi fi card to buy and put in? 952-454-1659 Thank you

John - Responder

This answer might be useful for others who still want to update their Wifi card in their R7-572.

I just replaced the original Broadcom BCM943228HMB on my R7-572 with an Intel 7260HMW CN: 08TF1D (Standard half-height mini PCI-e interface card ). I found it on ebay:https://www.ebay.ca/itm/4-0-Wireless-Min... (19 USD as of October 2018)

After the card is installed, run Intel Driver & Support Assistant and my driver where updated to the latest ones (for both the AC 7260 and the Bluetooth adapter). http://www.intel.com/content/www/us/en/s...

I am using Windows 8.1 on this laptop.

HTH

Michael Cantinotti - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 33

Duração total: 3,274