Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Shut down the laptop and disconnect the power cord.
-
Turn the laptop over.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove seven 10 mm T7 screws.
-
Remove four 6 mm T7 screws.
-
Use the blue plastic opening tool to carefully remove both rubber pads which cover the four remaining screws.
-
Remove the remaining four 10 mm T7 screws.
Step 2 is missing the 1 (10mm T-7 ) screw that is under a rubber pad in the bottom middle of the laptop. The picture shows this pad and screw already missing. Note the silver color instead of the black color of the rest of the bottom of the laptop.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Locate the battery ribbon connector
-
Remove the ribbon cable attaching the battery to the motherboard by carefully pulling it outwards
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the three 4.5mm #00 Phillips screws attaching the battery to the motherboard
-
Push the 4 retaining clips away from the battery
-
Carefully lift the battery from the motherboard
-
Cancelar: não concluí este guia.
12 outras pessoas executaram este guia.
6 comentários
great instructions
hey how do you want då sel it for
super tuto
Thanks
P.S : A have add a short comment on step 2.
Bests regards
thank you for your help.
Use the blue plastic opening tool to carefully remove the rubber pad which covers the one remaining screw.
Picture shows the rubber pad removed but srew to be removed is not indicated
Anthymoine - Responder