Introdução

The Wifi card allows the user to connect to a wireless network. This guide will show you how to remove and replace the Wifi card in this laptop.

Peças

Não são necessárias peças.

Remove the ten 7mm Phillips #0 screws from the bottom. Remove the ten 7mm Phillips #0 screws from the bottom.
  • Remove the ten 7mm Phillips #0 screws from the bottom.

Adicionar comentário

Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
  • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

Adicionar comentário

Disconnect the two antenna cables from the Wi-Fi card. Disconnect the two antenna cables from the Wi-Fi card.
  • Disconnect the two antenna cables from the Wi-Fi card.

Adicionar comentário

Remove the single 5mm Phillips #0 screw from the Wi-Fi card. Remove the single 5mm Phillips #0 screw from the Wi-Fi card.
  • Remove the single 5mm Phillips #0 screw from the Wi-Fi card.

Adicionar comentário

Slide out the Wifi card from its slot by pulling parallel to the board. Slide out the Wifi card from its slot by pulling parallel to the board.
  • Slide out the Wifi card from its slot by pulling parallel to the board.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Joseph

Member since: 25-01-2018

565 reputação

6 Guides authored

Equipe

USF Tampa, Team S20-G1, Passmore Spring 2018 Membro de USF Tampa, Team S20-G1, Passmore Spring 2018

USFT-PASSMORE-S18S20G1

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 9

Todo: 35