Pular para o conteúdo principal

Introdução

The back panel is essential to covering all of the components of the laptop. This guide will show you how to remove the back panel.

Peças

Nenhum componente especificado.

  1. Remove the ten 7mm Phillips #0 screws from the bottom. Remove the ten 7mm Phillips #0 screws from the bottom.
    • Remove the ten 7mm Phillips #0 screws from the bottom.

  2. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
    • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Joseph

Membro desde: 25-01-2018

589 reputação

6 Guias de autoria

Equipe

USF Tampa, Team S20-G1, Passmore Spring 2018 Membro de USF Tampa, Team S20-G1, Passmore Spring 2018

USFT-PASSMORE-S18S20G1

3 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 7

Últimos 30 dias: 20

Todo: 243