Introdução

If your laptop wont boot, it may be because of a corrupted hard drive. This simple guide will show you how to remove the hard drive for this laptop. Be sure to fallow the steps in order. In the end you will be able to remove and replace the current hard drive.

  1. Remove the twenty-five 6mm Phillips #0 screws from the bottom panel of the laptop.
    • Remove the twenty-five 6mm Phillips #0 screws from the bottom panel of the laptop.

  2. Using the plastic opening tool, lift up on the side opposite of the Ethernet connector.
    • Using the plastic opening tool, lift up on the side opposite of the Ethernet connector.

    • With the plastic opening tool under the bottom panel, work your way around the perimeter until the panel separates.

  3. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Remove the two 6mm Phillips #0 screws from the battery.
    • Remove the two 6mm Phillips #0 screws from the battery.

  5. Disconnect the battery from the motherboard. Pull the battery up and out of the laptop.
    • Disconnect the battery from the motherboard.

    • Pull the battery up and out of the laptop.

  6. Remove the four 3mm Phillips #0 screws from the hard drive.
    • Remove the four 3mm Phillips #0 screws from the hard drive.

  7. Use a spudger to flip up the retaining flap on the hard drive ribbon cable ZIF socket.
    • Use a spudger to flip up the retaining flap on the hard drive ribbon cable ZIF socket.

    • Pull the ribbon cable out of the ZIF connector and remove the hard drive from the laptop.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ed Herrera

Member since: 25-01-2018

385 reputação

3 Guides authored

Equipe

USF Tampa, Team S7-G3, Passmore Spring 2018 Membro de USF Tampa, Team S7-G3, Passmore Spring 2018

USFT-PASSMORE-S18S7G3

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 10

Todo: 135