Ir para o conteúdo principal

Introdução

Hard drives store all your data, but they are slow and can fail. This guide will show you how to replace a broken or slow hard drive with a different hard drive or solid state drive.

Peças

Nenhum componente especificado.

  1. Unscrew the single (5mm) Philips head screw holding the drive in place.
    • Unscrew the single (5mm) Philips head screw holding the drive in place.

  2. Pull out the optical drive.
    • Pull out the optical drive.

  3. Unscrew all 17 (5mm) Philips head screws from the bottom. Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.
    • Unscrew all 17 (5mm) Philips head screws from the bottom.

    • Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.

  4. Run a pick around the edge of the laptop (between the two parts) to open it. Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.
    • Run a pick around the edge of the laptop (between the two parts) to open it.

    • Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.

  5. Remove the hard drive by pulling it out to the left.
    • Remove the hard drive by pulling it out to the left.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Alex Bahm

Membro desde: 18-01-2018

1.538 Reputation

6 Guias de autoria

Team

Cal Poly, Team S12-G5, Banghart Winter 2018 Membro de Cal Poly, Team S12-G5, Banghart Winter 2018

CPSU-BANGHART-W18S12G5

3 Membros

13 Guias de autoria

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 42

Past 30 Days: 163

All Time: 2,689