Ir para o conteúdo principal

Acer AL1714 Video Display Board

O que você precisa

  1. Acer AL1714 Video Display Board, Video Display Board: passo 1, imagem 1 %32 Acer AL1714 Video Display Board, Video Display Board: passo 1, imagem 2 %32
    • Turn the monitor face-down.

    • Unscrew the 5 screws holding back cover on.

    • (This may require flipping the monitor over and shaking the screws loose once they're already unscrewed)

  2. Acer AL1714 Video Display Board: passo 2, imagem 1 %32 Acer AL1714 Video Display Board: passo 2, imagem 2 %32 Acer AL1714 Video Display Board: passo 2, imagem 3 %32
    • Take the edge tool or a metal ruler and insert it into the bezel.

    • Apply pressure and push down.

    • Do the same to the right side.

    • Once the side of the bezel facing you is decoupled, take the back cover and pry it loose.

  3. Acer AL1714 Video Display Board: passo 3, imagem 1 %32 Acer AL1714 Video Display Board: passo 3, imagem 2 %32 Acer AL1714 Video Display Board: passo 3, imagem 3 %32
    • Remove the Flat Flex Cable from the Power Supply board located under the metal cage.

    • Pull the cord back and out of the way.

    • (It may be stuck down with adhesive)

  4. Acer AL1714 Video Display Board: passo 4, imagem 1 %32 Acer AL1714 Video Display Board: passo 4, imagem 2 %32 Acer AL1714 Video Display Board: passo 4, imagem 3 %32
    • Unscrew the cord anchors for the VGA port.

    • (Use needle nose pliers if they're too tight for removal by hand)

  5. Acer AL1714 Video Display Board: passo 5, imagem 1 %32 Acer AL1714 Video Display Board: passo 5, imagem 2 %32
    • Turn the monitor around.

    • Unscrew the 1 screw holding the Flat power Cable cover on.

    • Lift up and remove the Flat Power Cable cover.

    • (Careful: this may be sharp)

  6. Acer AL1714 Video Display Board: passo 6, imagem 1 %32
    • Unscrew the 5 screws holding the metal cage on.

  7. Acer AL1714 Video Display Board: passo 7, imagem 1 %32 Acer AL1714 Video Display Board: passo 7, imagem 2 %32
    • Turn the monitor around.

    • Lift the back of the metal cage slightly.

    • Pull the cage toward self.

    • (Must be careful to free the cover of the VGA port and the power supply input)

  8. Acer AL1714 Video Display Board: passo 8, imagem 1 %32 Acer AL1714 Video Display Board: passo 8, imagem 2 %32 Acer AL1714 Video Display Board: passo 8, imagem 3 %32
    • Lift the Flat Flex Cable holder tabs to release the cables.

    • Lift up on the Flat Flex Cables and bend them out of the working area.

  9. Acer AL1714 Video Display Board: passo 9, imagem 1 %32 Acer AL1714 Video Display Board: passo 9, imagem 2 %32 Acer AL1714 Video Display Board: passo 9, imagem 3 %32
    • Unplug the 4 backlight wires from their ports on the Power Supply Board.

    • (Considering their size, the best way to unplug the backlight wires is by slowly jiggling the wires out of place)

  10. Acer AL1714 Video Display Board: passo 10, imagem 1 %32
    • Unscrew the 5 screws holding the Power Supply and Video Display boards.

  11. Acer AL1714 Video Display Board: passo 11, imagem 1 %32 Acer AL1714 Video Display Board: passo 11, imagem 2 %32
    • Lift and remove the joined boards.

  12. Acer AL1714 Video Display Board: passo 12, imagem 1 %32 Acer AL1714 Video Display Board: passo 12, imagem 2 %32 Acer AL1714 Video Display Board: passo 12, imagem 3 %32
    • Carefully detach the two boards at their connector joint.

    • Replace outlined part.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Christopher Kelly

Membro desde: 09/25/14

590 Reputação

Autoria de 4 guias

Equipe

USF Tampa, Team 1-3, Brown Fall 2014 Membro de USF Tampa, Team 1-3, Brown Fall 2014

USFT-BROWN-F14S1G3

Membros da 3

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 16

Duração total: 700