Conserte seus objetos Comunidade Loja

ATT Trimline 210M Back Cover Replacement

Introdução

You will need to open up the phone in order to be able to detach the back cover and replace it. This repair might be needed if there is no ring coming from the phone.

O que você precisa

  1. ATT Trimline 210M Back Cover Replacement, ATT Trimline 210M Back Cover Disassembly: passo 1, imagem 1 %32

    • Open up the phone with a metal spudger, sticking it in the bottom near the cord jack entry.

    • Be careful with the amount of force you use, or the plastic may crack.

    Editar

  2. ATT Trimline 210M Back Cover Replacement: passo 2, imagem 1 %32

    • Pull up on the spudger while simultaneously pulling up the top shell of the phone.

    Editar

  4. ATT Trimline 210M Back Cover Replacement: passo 3, imagem 1 %32

    • After unclipping the bottom half of the shell, pull upward from the position shown in the picture to detach the top half of the shell.

    • The cord connecting the speaker is short, and may detach if not done carefully.

    Editar

  5. ATT Trimline 210M Back Cover Replacement: passo 4, imagem 1 %32

    • You will have the motherboard and speaker exposed to you.

    Editar

  6. ATT Trimline 210M Back Cover Replacement, Back Cover: passo 5, imagem 1 %32

    • Detatch the black and red wire from the back cover.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 2 outros contribuidores

Juan Carrillo

Membro desde: 02/10/16

406 Reputação

Autoria de 3 guias

Emblemas: 8

+5 outros emblemas

Equipe

USF Tampa, Team 4-2, Lacy Spring 2016 Membro de USF Tampa, Team 4-2, Lacy Spring 2016

USFT-LACY-S16S4G2

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 9

Duração total: 924