ATH-M40x Earpad Cushion Replacement

Introdução

This guide will show you how to replace the worn-out earpad cushions on your Audio Technica ATH-M40x headphones. Whether you want to extend the life of your headphones, restore sound quality, or opt for cushions that provide a better fit, this guide has you covered.

Make sure replacement cushions match the specifications of the ATH-M40x model before you begin.

O que você precisa

Passo 1 Earpad Cushion

ATH-M40x Earpad Cushion Replacement, Earpad Cushion: passo 1, imagem 1 %32

ATH-M40x Earpad Cushion Replacement, Earpad Cushion: passo 1, imagem 2 %32

ATH-M40x Earpad Cushion Replacement, Earpad Cushion: passo 1, imagem 3 %32

Turn the headphone cable counter-clockwise to unlock.
Remove the headphone cable by pulling it out.
The headphone cable is unlocked when the white line markers are not aligned.

Editar

Passo 2

ATH-M40x Earpad Cushion Replacement: passo 2, imagem 3 %32

Turn the earcups over to make removal of the cushion easier.

Editar

Passo 3

ATH-M40x Earpad Cushion Replacement: passo 3, imagem 3 %32

With one hand, hold your headphones in place while the other grips the earpad cushion.
Gently pry the old earpad cushion off.
You may need to slide it off the lip of the driver before prying it off.

Editar

Passo 4

Ferramenta utilizada nesse passo:

Microfiber Cleaning Cloths

$3.99

Comprar

Use a microfiber cloth to wipe off any moisture or debris from the headphone drivers before installing your new earpad cushion.
Using a damp or wet cloth may damage headphone drivers.