Conserte seus objetos Comunidade Loja

ASUS ZenWatch Charging Cradle Circuit board Replacement

Introdução

Replacing the circuit in the charging cradle

O que você precisa

  1. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: passo 1, imagem 1 %32 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: passo 1, imagem 2 %32 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: passo 1, imagem 3 %32

    • Using a metal spudger gently pry the plastic outer case apart

    • Pry open a little bit on each side before trying to open fully

    Editar

  3. ASUS ZenWatch Charging Cradle Circuit board Replacement: passo 2, imagem 1 %32 ASUS ZenWatch Charging Cradle Circuit board Replacement: passo 2, imagem 2 %32 ASUS ZenWatch Charging Cradle Circuit board Replacement: passo 2, imagem 3 %32

    • Use the PH0 sized Phillips screwdriver to remove the three screws (2mm) holding the board to the cradle.

    • Gently pry up with your hands to pull the board off.

    • Don't grab directly on the USB port as you may loosen or bust the connections.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Wayne McClure

Membro desde: 02/10/16

961 Reputação

Autoria de 5 guias

Emblemas: 14

+11 outros emblemas

Equipe

USF Tampa, Team 1-3, Sullivan Spring 2016 Membro de USF Tampa, Team 1-3, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G3

4 Membros

Autoria de 7 guias

1Comentário do guia

If you had listed what components were on the board or at least taken a picture of the other side of the board, I might have given you some points.

Nate Fansler - Responder

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Ao todo: 2,911