Conserte seus objetos Comunidade Loja

8BitDo Ultimate Wired Motherboard Replacement

Introdução

You can access the motherboard with this guide if you need to replace it. You may need to change the motherboard when it's not being listed in consolle accessories or the controller is not syncing with the xbox.

For this guide, you will need a plastic opening tool, a Phillips #0 screwdriver, a TR6 Torx Security screwdriver, and ESD-safe blunt nose tweezers (optional).

You will not need to do any difficult steps, but be careful not to damage anything when you take off the top panel. Ensure the controller is not plugged into a power source or operating system.

O que você precisa

  1. 8BitDo Ultimate Wired Motherboard Replacement, Motherboard: passo 1, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement, Motherboard: passo 1, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement, Motherboard: passo 1, imagem 3 %32

    • Orient the controller such that the back of the controller is facing you.

    • Insert an opening tool into the small opening on the back of the grip, and gently pry the grip cover away until it pops free.

    Editar

  2. 8BitDo Ultimate Wired Motherboard Replacement: passo 2, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 2, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 2, imagem 3 %32

    • Pry the other grip panel off using the same method.

    Editar

  3. 8BitDo Ultimate Wired Motherboard Replacement: passo 3, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 3, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 3, imagem 3 %32

    • Use the TR6 Torx Security screwdriver to remove the top left 10.44 mm torx screw on the backside.

    • Use tweezers to remove the screws (optional).

    Editar

  4. 8BitDo Ultimate Wired Motherboard Replacement: passo 4, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 4, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 4, imagem 3 %32

    • Use the TR6 Torx Security screwdriver to remove the middle left 10.44 mm Torx screw on the backside.

    Editar

  5. 8BitDo Ultimate Wired Motherboard Replacement: passo 5, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 5, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 5, imagem 3 %32

    • Use the TR6 Torx Security screwdriver to remove the bottom left 10.44 mm Torx screw on the backside.

    Editar

  6. 8BitDo Ultimate Wired Motherboard Replacement: passo 6, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 6, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 6, imagem 3 %32

    • Use the TR6 Torx Security screwdriver to remove the top right 10.44 mm Torx screw on the backside.

    Editar

  7. 8BitDo Ultimate Wired Motherboard Replacement: passo 7, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 7, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 7, imagem 3 %32

    • Use the TR6 Torx Security screwdriver to remove the middle right 10.44 mm Torx screw on the backside.

    Editar

  8. 8BitDo Ultimate Wired Motherboard Replacement: passo 8, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 8, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 8, imagem 3 %32

    • Use the TR6 Torx Security screwdriver to unscrew the bottom right 10.44 mm Torx screw on the backside.

    Editar

  10. 8BitDo Ultimate Wired Motherboard Replacement: passo 9, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 9, imagem 2 %32

    • Orient the controller such that the back of the controller is facing you.

    • Insert an opening tool into the small opening between the front and back panels, and gently pry the back panel away to open the bottom clamps of the top panel of the controller.

    Editar

  11. 8BitDo Ultimate Wired Motherboard Replacement: passo 10, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 10, imagem 2 %32

    • Insert an opening tool into the small opening between the front and back panel (top view) and pry away to remove the top half.

    • A ribbon cable connects the front and back portions of the controller.

    Editar

  12. 8BitDo Ultimate Wired Motherboard Replacement: passo 11, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 11, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 11, imagem 3 %32

    • Pull the midframe with an adequate amount of force.

    Editar

  13. 8BitDo Ultimate Wired Motherboard Replacement: passo 12, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 12, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 12, imagem 3 %32

    • Gently pull the vibration motor connector out of its socket.

    Editar

  14. 8BitDo Ultimate Wired Motherboard Replacement: passo 13, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 13, imagem 2 %32

    • Pull the weight out of the housing with adequate force.

    Editar

  15. 8BitDo Ultimate Wired Motherboard Replacement: passo 14, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 14, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 14, imagem 3 %32

    • Use tweezers to gently unplug the bumper on the right hand side.

    Editar

  16. 8BitDo Ultimate Wired Motherboard Replacement: passo 15, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 15, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 15, imagem 3 %32

    • Use tweezers to gently unplug the bumpers on the left hand side.

    Editar

  17. 8BitDo Ultimate Wired Motherboard Replacement: passo 16, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 16, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 16, imagem 3 %32

    • Use your fingers to remove the joystick cover on the left hand side with adequate force.

    Editar

  18. 8BitDo Ultimate Wired Motherboard Replacement: passo 17, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 17, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 17, imagem 3 %32

    • Use your fingers to remove the joystick cover on the right hand side with adequate force.

    Editar

  19. 8BitDo Ultimate Wired Motherboard Replacement: passo 18, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 18, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 18, imagem 3 %32

    • Use an opening tool to pry the motherboard apart from the structure of the controller

    Editar

  20. 8BitDo Ultimate Wired Motherboard Replacement: passo 19, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 19, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 19, imagem 3 %32

    • Use a Jimmy to open the small metal bracket (right) on the front side of the motherboard.

    Editar

  21. 8BitDo Ultimate Wired Motherboard Replacement: passo 20, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 20, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 20, imagem 3 %32

    • Use a Jimmy to open the small metal bracket (left) on the front side of the motherboard.

    Editar

  22. 8BitDo Ultimate Wired Motherboard Replacement: passo 21, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 21, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 21, imagem 3 %32

    • Use tweezers to remove the white strip from the black bracket.

    Editar

  23. 8BitDo Ultimate Wired Motherboard Replacement: passo 22, imagem 1 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 22, imagem 2 %32 8BitDo Ultimate Wired Motherboard Replacement: passo 22, imagem 3 %32

    • Use your fingers to gently remove the power cord.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 10

Últimos 30 dias: 39

Duração total: 87