Ir para o conteúdo principal

4Sight 9 Motherboard Replacement

O que você precisa

  1. 4Sight 9 Motherboard Replacement, Cover: passo 1, imagem 1 %32 4Sight 9 Motherboard Replacement, Cover: passo 1, imagem 2 %32
    • Place the tablet on its side so that the two screws are facing upward.

    • Remove two 1 mm screws from the left side of the tablet using a Phillips #00 screwdriver.

  2. 4Sight 9 Motherboard Replacement: passo 2, imagem 1 %32
    • Pry the case away from the device slowly by sliding a plastic opening tool along the device.

    • Once loosened, use your hands to separate the case from the device.

  3. 4Sight 9 Motherboard Replacement: passo 3, imagem 1 %32 4Sight 9 Motherboard Replacement: passo 3, imagem 2 %32
    • Hold the positive and negative wires as close as possible to the speaker.

    • Use an opening tool and fingers to simultaneously lift the speaker from the cover.

  4. 4Sight 9 Motherboard Replacement, Motherboard: passo 4, imagem 1 %32
    • Use soldering gun to remove the positive and negative wires connecting the battery to the circuit board.

    • For a complete guide on how to solder, click here.

  5. 4Sight 9 Motherboard Replacement: passo 5, imagem 1 %32 4Sight 9 Motherboard Replacement: passo 5, imagem 2 %32
    • Grip the ribbon located at the far end of the circuit board with a plastic spudger tool.

    • Put pressure on the connector until the clasp comes undone.

    • Gently pull up on electrical ribbon until it disconnects from circuit board.

  6. 4Sight 9 Motherboard Replacement: passo 6, imagem 1 %32 4Sight 9 Motherboard Replacement: passo 6, imagem 2 %32
    • Remove the second electrical ribbon from the motherboard.

    • Use the technique for the previous ribbon.

  7. 4Sight 9 Motherboard Replacement: passo 7, imagem 1 %32
    • Using #00 Phillips Screwdriver, remove the four 1mm screws holding the circuit board to the device.

  8. 4Sight 9 Motherboard Replacement: passo 8, imagem 1 %32 4Sight 9 Motherboard Replacement: passo 8, imagem 2 %32
    • With fingers, grip the green Wi-Fi connector.

    • Gently pull up on connector to remove tape holding the connector in place.

  9. 4Sight 9 Motherboard Replacement: passo 9, imagem 1 %32
    • Using your fingers, gently lift the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 6

Últimos 30 dias: 7

Duração total: 1,332