Ir para o conteúdo principal

2007-2012 Jeep Wrangler Headlight Replacement

O que você precisa

  1. 2007-2012 Jeep Wrangler Headlight Replacement, Headlight: passo 1, imagem 1 %32 2007-2012 Jeep Wrangler Headlight Replacement, Headlight: passo 1, imagem 2 %32
    • Locate the two gray latches on either side of the hood near the headlights.

    • Pull the latches away from the hood to release the latches.

  2. 2007-2012 Jeep Wrangler Headlight Replacement: passo 2, imagem 1 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 2, imagem 2 %32
    • Reach under the hood and push the lever left to right. You should now be able to lift the hood.

    • Prop open the hood by inserting the support rod into the designated hole on the underside of the hood.

  3. 2007-2012 Jeep Wrangler Headlight Replacement: passo 3, imagem 1 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 3, imagem 2 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 3, imagem 3 %32
    • Locate all six push on fasteners on the top of the grill.

    • Use a flathead screwdriver to pry up the fasteners, and make sure you put the screws somewhere safe.

    • If the fasteners will not come up, use two flathead screwdrivers on either side of the fastener to remove.

  4. 2007-2012 Jeep Wrangler Headlight Replacement: passo 4, imagem 1 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 4, imagem 2 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 4, imagem 3 %32
    • Locate right and left blinker lights under the fenders.

    • Twist blinker light toward the ground, and make sure you pull the bulb out carefully.

    • Make sure you are handling bulb carefully.

  5. 2007-2012 Jeep Wrangler Headlight Replacement: passo 5, imagem 1 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 5, imagem 2 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 5, imagem 3 %32
    • Make sure all fasteners are removed from top of the grill, and the top of the grill is loose.

    • Firmly pull the bottom of the grill until the grill disconnects from the jeep.

  6. 2007-2012 Jeep Wrangler Headlight Replacement: passo 6, imagem 1 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 6, imagem 2 %32
    • Locate the 4 screws holding the headlight in place.

    • Use a star bit screwdriver to unscrew the .164-18 x .625 mm star bit screws around the headlight, and make sure you place screws somewhere safe.

    • Hold the headlight when unscrewing last screw to prevent the headlight from falling.

  7. 2007-2012 Jeep Wrangler Headlight Replacement: passo 7, imagem 1 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 7, imagem 2 %32
    • Use your hands to carefully remove silver ring from the headlight.

  8. 2007-2012 Jeep Wrangler Headlight Replacement: passo 8, imagem 1 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 8, imagem 2 %32 2007-2012 Jeep Wrangler Headlight Replacement: passo 8, imagem 3 %32
    • Locate red tab on the headlight plug connector, and push it away from the headlight.

    • Firmly pull the connector away from headlight to remove.

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas executaram este guia.

Marco Santini

Membro desde: 09/29/15

290 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 17-3, Green Fall 2015 Membro de Cal Poly, Team 17-3, Green Fall 2015

CPSU-GREEN-F15S17G3

Membros da 4

Autoria de 3 guias

2 comentários

Could Jeep make it more difficult to do simple maintenance? I doubt it!

Linda Procida - Responder

What is that green connector called? I’m having trouble putting new lights because none of the converters fit.

Alex - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 12

Últimos 30 dias: 95

Duração total: 20,311