Conserte seus objetos Comunidade Loja

2006-2013 Toyota Corolla Ignition Coil Replacement

Introdução

This is a guide to remove an old ignition coil and install a new one. This is standard maintenance for this vehicle and can be preformed with just a socket wrench with a ten millimeter head.

O que você precisa

  1. 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, imagem 1 %32 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, imagem 2 %32 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, imagem 3 %32

    • Pop the hood and remove the black plastic cover over the engine.

    • There is nothing to unscrew, or unlatch, and the cover should lift off. Once removed, the top of the engine will look like the third picture

    Editar

  2. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 2, imagem 1 %32 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 2, imagem 2 %32

    • Unplug the ignition coil you wish to replace. The coils are numbered one though four, left to right.

    • Do not unscrew the bolt on the ignition coil before this step. It makes the electrical plug more difficult to remove

    Editar

  4. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 3, imagem 1 %32

    • Unscrew the bolt of the coil that needs to be replaced.

    • Be sure to put the bolt in a place you will not lose it!

    Editar

  5. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 4, imagem 1 %32 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 4, imagem 2 %32

    • Pull the coil straight up and out. It should come off of the spark plug with little resistance.

    Editar

  6. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 5, imagem 1 %32 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 5, imagem 2 %32

    • Apply a pea-sized amount of grease to the new ignition coil. It should be all around the rubber tip around the bottom.

    • While not required, this step will make any future replacements much easier.

    Editar

  7. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 6, imagem 1 %32

    • When inserting the new ignition coil, press down lightly to ensure it is completely in place.

    • Re-plugging in the ignition coil, and re-screw it in. This can be preformed in either order.

    • Repeat steps three through five as necessary for the other three ignition coils.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Henderson Gillette

Membro desde: 09/23/23

133 Reputação

Autoria de 1 guia

Emblemas: 3

Equipe

Austin Community College, Team 22-3, Watkins Fall 2023 Membro de Austin Community College, Team 22-3, Watkins Fall 2023

AUSTINCC-WATKINS-F23S22G3

Membros da 2

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 9

Últimos 7 dias: 81

Últimos 30 dias: 306

Duração total: 928