Conserte seus objetos Comunidade Loja

2006-2013 Toyota Corolla Ignition Coil Replacement

Introdução

This is a guide to remove an old ignition coil and install a new one. This is standard maintenance for this vehicle and can be preformed with just a socket wrench with a ten millimeter head.

O que você precisa

  1. 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, imagem 1 %32 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, imagem 2 %32 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, imagem 3 %32

    • Pop the hood and remove the black plastic cover over the engine.

    • There is nothing to unscrew, or unlatch, and the cover should lift off. Once removed, the top of the engine will look like the third picture

    Editar

  2. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 2, imagem 1 %32 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 2, imagem 2 %32

    • Unplug the ignition coil you wish to replace. The coils are numbered one though four, left to right.

    • Do not unscrew the bolt on the ignition coil before this step. It makes the electrical plug more difficult to remove

    Editar

  4. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 3, imagem 1 %32

    • Unscrew the bolt of the coil that needs to be replaced.

    • Be sure to put the bolt in a place you will not lose it!

    Editar

  5. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 4, imagem 1 %32 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 4, imagem 2 %32

    • Pull the coil straight up and out. It should come off of the spark plug with little resistance.

    Editar

  6. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 5, imagem 1 %32 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 5, imagem 2 %32

    • Apply a pea-sized amount of grease to the new ignition coil. It should be all around the rubber tip around the bottom.

    • While not required, this step will make any future replacements much easier.

    Editar

  7. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 6, imagem 1 %32

    • When inserting the new ignition coil, press down lightly to ensure it is completely in place.

    • Re-plugging in the ignition coil, and re-screw it in. This can be preformed in either order.

    • Repeat steps three through five as necessary for the other three ignition coils.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Henderson Gillette

Membro desde: 09/23/23

160 Reputação

Autoria de 1 guia

Emblemas: 5

+2 outros emblemas

Equipe

Austin Community College, Team 22-3, Watkins Fall 2023 Membro de Austin Community College, Team 22-3, Watkins Fall 2023

AUSTINCC-WATKINS-F23S22G3

Membros da 2

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 74

Últimos 30 dias: 302

Duração total: 1,066