Ir para o conteúdo principal

2000 Gmc Sierra Light Replacement

O que você precisa

  1. 2000 Gmc Sierra Light Replacement, Headlights, Taillights, and an overhead light: passo 1, imagem 1 %32
    • Open your tailgate fully, exposing both sides where the tailgate sits.

  2. 2000 Gmc Sierra Light Replacement: passo 2, imagem 1 %32
    • Unscrew the two phillips head screws located above and below the tailgate support.

  3. 2000 Gmc Sierra Light Replacement: passo 3, imagem 1 %32
    • Once the screws have been removed, simply pull off the taillight. The red plug is the taillight. Twist it a quarter turn counter clockwise, and pop it out.

  4. 2000 Gmc Sierra Light Replacement: passo 4, imagem 1 %32
    • Remove the old bulb and replace it with your new one.

    • Side note: Make sure replacement bulb is save voltage/amperage rating.

    • Open the hood and take a look above your headlights.

    • Two metal pins holding each of the headlights in place will need to be removed (no tool necessary).

    • Turn the plastic headlight mount counter clockwise by one quarter of a turn.

    • Then lift the pins up to fully remove them.

    • Once the pins have been removed, GENTLY pull your headlight upwards, towards you. The bulbs should now be exposed. The bulb on the top is your headlight.

    • As you did with the taillight bulb, turn the piece that is holding the bulb in place a quarter turn counter clockwise, and the bulb will pop out. Now your new bulb will take it's place.

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

keith beaudoin

Membro desde: 10/11/13

275 Reputação

Autoria de 1 guia

Equipe

UMass Dartmouth, Team 4-7, Vijaybhaskar Fall 2013 Membro de UMass Dartmouth, Team 4-7, Vijaybhaskar Fall 2013

UMASSD-VIJAYBHASKAR-F13S4G7

Membros da 2

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 10

Duração total: 487