2000-2003 Toyota Sienna Windshield Wiper Replacement (2000, 2001, 2002, 2003)

Introdução

Learning how to replace a windshield wiper is essential to car ownership. Damaged wipers lead to impeded visibility due to streaking or not being able to clear the windshield. Driving with damaged wipers is dangerous and car owners should make sure to replace their blades every spring or fall. This guide explains how to replace the front windshield wipers on a 2000-2003 Toyota Sienna, and includes pictures and detailed instructions for the entire process.

O que você precisa

Passo 1 Windshield Wiper

2000-2003 Toyota Sienna Windshield Wiper Replacement, Windshield Wiper: passo 1, imagem 1 %32

Lift the windshield wiper to a 90-degree angle above the windshield.

Editar

Passo 2

2000-2003 Toyota Sienna Windshield Wiper Replacement: passo 2, imagem 3 %32

Tilt the wiper upwards.
Pull the wiper blade down to release it from the j-hook.
Different brands of wipers use different unlatching mechanisms; these vary from pinching and pulling to pushing a button.

Editar

Passo 3

Lay the arm back down onto the windshield.
Place the arm gently back down to avoid any damage.

Editar

Passo 4

Remove the plastic protection from the rubber side of the new wiper blades.

Editar

Passo 5

Lift the wiper arm back up and latch the j-hook around the mounting point of the new blade.

Editar

Passo 6

2000-2003 Toyota Sienna Windshield Wiper Replacement: passo 6, imagem 3 %32

Gently lay the wipers back down onto windshield.

Editar

Passo 7

2000-2003 Toyota Sienna Windshield Wiper Replacement: passo 7, imagem 3 %32

Start your vehicle.
Turn on the windshield wipers to ensure they are functioning properly.
Do not turn the engine on in a closed space to prevent carbon monoxide poisoning.