1. Use a #2 Phillips screwdriver to remove the four screws.
    • Use a #2 Phillips screwdriver to remove the four screws.

    Adicionar comentário

  2. Remove the rubber gasket from the rain tray.
    • Remove the rubber gasket from the rain tray.

    Adicionar comentário

    • Lift the tray upwards and away from the vehicle.

    Adicionar comentário

    • Use a flathead screwdriver to remove the cap from the windshield wiper.

    Adicionar comentário

    • Use a socket wrench to release the passenger-side windshield wiper locking nut.

    Adicionar comentário

    • Gently lift up the passenger-side windshield wiper.

    Adicionar comentário

    • Remove the driver-side windshield wiper in the same fashion.

    Adicionar comentário

    • Lift up the plastic cover.

    Adicionar comentário

    • Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover.

    • In a pinch, you can make this tool with a phillips driver bit and end wrench.

    Adicionar comentário

    • Use a #2 Phillips screwdriver to remove the front two screws.

    Adicionar comentário

    • Gently unplug and lift out the automatic transmission control unit.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas concluíram este guia.

Matthew Newsom

Member since: 05-01-2010

31.903 reputação

67 Guides authored

Does the new TCU need to be programmed in any way?? Or is it just plug and play.

Paul Newlove - Responder

does it need to be programmed mine needs replacement my gears are not shifting

dean wafula - Responder

got a question if your display light is dim what could be the problem

dean wafula - Responder

Volkswagen tiguan won't start after disconnection, wat can I do to restart it

Jusu Suapay - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 8

Últimos 7 dias: 46

Últimos 30 dias: 169

Todo: 31,572