Introdução

Here you will learn how to remove the wood panel from the center dash unit. After doing this guide you will be free to get to the center dash and stereo/cd/cassete players.

Peças

Não são necessárias peças.

  1. Using a panel tool or long flat head screwdriver, pry the wood grain trim off and release the clips.  Be careful on the thin sections below the head unit as to not snap the trim.
    • Using a panel tool or long flat head screwdriver, pry the wood grain trim off and release the clips. Be careful on the thin sections below the head unit as to not snap the trim.

    Adicionar comentário

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Detach the wiring harness from the back of the air conditioning control unit by pushing down on the top middle tab and pulling apart using a screwdriver for leverage if necessary.
    • Detach the wiring harness from the back of the air conditioning control unit by pushing down on the top middle tab and pulling apart using a screwdriver for leverage if necessary.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Brayden

Member since: 05-10-2012

13 reputação

5 Guides authored

Equipe

Cal Poly, Team 18-42, Regan Fall 2012 Membro de Cal Poly, Team 18-42, Regan Fall 2012

CPSU-REGAN-F12S18G42

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 9

Todo: 2,041