Conserte seus objetos Comunidade Loja

1992-1996 Ford F series-Bronco Header Panel Replacement

Introdução

In this guide, you will need very few tools to replace your header panel. This is a fast, and safe way to replace your header panel. Out of caution, before completing make sure your vehicle is shut off, and your emergency break is applied.

O que você precisa

  1. 1992-1996 Ford F series-Bronco Header Panel Replacement, Header Panel: passo 1, imagem 1 %32

    • Remove the 5 screws with the screwdriver to remove the grill.

    Editar

  2. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 2, imagem 1 %32

    • Set aside the windshield fluid/coolant reservoir by removing the 11mm bolt.

    Editar

  3. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 3, imagem 1 %32

    • Remove the two screws on top of the headlight bezel, and the two 11mm bolts on the back of the bezel.

    • Then, remove the bolts from the housing. Repeat this step for the other headlight.

    Editar

  4. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 4, imagem 1 %32

    • Remove the bolts retaining the header panel using the 8mm socket and ratchet.

    Editar

  6. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 5, imagem 1 %32

    • Remove the headlight bulbs from the headlight housing by turning them counterclockwise on the retaining clip.

    Editar

  7. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 6, imagem 1 %32

    • Remove the old header panel, and install the replacement panel.

    Editar

  8. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 7, imagem 1 %32

    • Replace all of the bolts that retain the header panel.

    Editar

  9. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 8, imagem 1 %32

    • Reinstall the headlight bulbs by turning clockwise on the retaining clip.

    Editar

  10. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 9, imagem 1 %32

    • Reinstall the headlight bezels after reinserting the marker lights with the two screws, and two 11mm bolts.

    Editar

  11. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 10, imagem 1 %32

    • Reinstall the windshield fluid/coolant reservoir with the 11mm bolt.

    Editar

  12. 1992-1996 Ford F series-Bronco Header Panel Replacement: passo 11, imagem 1 %32

    • Reinstall the grill with the 5 screws.

    Editar
Linha de Chegada

Uma outra pessoa concluiu este guia.

Um comentário

My header panel was broke. Into like 5 pieces. I had everything pulled off my front end before realizing that I had not mapped out my process. This really helped me put it all back together.

I would love a parts source guide for all of the clips, fasteners and screws for all of this as some of mine were beyond reuse.

Brandon Sewall - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 17

Duração total: 1,379