Introdução

When a car is driven, tires tend to wear unevenly. To extend the life of tires, it is important to rotate the tires every 30,000 miles. This guide will show you how to remove and rotate tires.

Ferramentas

Peças

Não são necessárias peças.

Turn car off and remove keys from ignition.
  • Turn car off and remove keys from ignition.

  • Place car in park (automatic) or neutral (manual).

  • Engage parking brake.

Adicionar comentário

Use hydraulic jack on frame of car to raise car.
  • Use hydraulic jack on frame of car to raise car.

  • Place jack head underneath frame of car.

  • Only necessary to jack the car until the wheels are just off the ground.

Adicionar comentário

Place jack stand on frame of car and remove jack.
  • Place jack stand on frame of car and remove jack.

  • Do no work under car supported only by hydraulic jack, serious injury or death may occur.

Adicionar comentário

Turn car off and remove keys from ignition.
  • Turn car off and remove keys from ignition.

  • Place car in park (automatic) or neutral (manual).

  • Engage parking brake.

Adicionar comentário

Use hydraulic jack on frame of car to raise car. Place jack head underneath frame couple (pictured).
  • Use hydraulic jack on frame of car to raise car.

  • Place jack head underneath frame couple (pictured).

  • Only necessary to jack the car until the wheels are just off the ground.

Adicionar comentário

Place jack stand on frame of car and remove jack. Do not work under car supported only by hydraulic jack, serious injury or death may result.
  • Place jack stand on frame of car and remove jack.

  • Do not work under car supported only by hydraulic jack, serious injury or death may result.

Adicionar comentário

Pry off the all four hub caps by placing a small flathead screwdriver between hubcap and rim pulling the screwdriver away from tire. Pull hubcaps away from tires.
  • Pry off the all four hub caps by placing a small flathead screwdriver between hubcap and rim pulling the screwdriver away from tire.

  • Pull hubcaps away from tires.

Adicionar comentário

Loosen each of the five lug nuts on all tires by turning them counter-clockwise with a 19mm wrench.
  • Loosen each of the five lug nuts on all tires by turning them counter-clockwise with a 19mm wrench.

Adicionar comentário

Remove tires by pulling directly away from car exposing brake rotors.
  • Remove tires by pulling directly away from car exposing brake rotors.

Adicionar comentário

Swap tires according to diagram.
  • Swap tires according to diagram.

Adicionar comentário

Place tires on axels.
  • Place tires on axels.

  • Hand tighten the lug nuts with narrow end of nut towards car.

  • Finish tightening the lug nuts with 19mm Torque Wrench to a torque of 63 lb*ft.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Garrett Van Ruiten

Member since: 11-10-2010

51 reputação

2 Guides authored

Equipe

Cal Poly, Team 3-28, Regan Fall 2010 Membro de Cal Poly, Team 3-28, Regan Fall 2010

CPSU-REGAN-F10S3G28

4 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 2,315