Ir para o conteúdo principal

Model A1046 or A1095 / 1280x854 screen resolution

126 Perguntas Visualizar todos

How to connect keyboard to logic board

I recently had to replace the dc board on my 1.5 GHz (model A1095) machine, and upon reassembly could not hook the keyboard cable to the logic board. I even went so far as to purchase a new keyboard thinking that perhaps I damaged the original one while taking the computer apart. I can not get either one to work, even when I try to hold it in place and boot the computer. It feels like it is not sliding all the way in, but I have never dealt with this before, so i do not know how far in the cable should go. Any help would be appreciated.

Thanks, Charl

Respondido! Ver a resposta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação -1
Adicionar um comentário

2 respostas

Solução escolhida

Did you push the locking tab back in when you put the cable in? I have removed and re-attached a keyboard for a 17" PBG4, but never the 15" aluminum.

Esta resposta foi útil?

Pontuação 3


To be honest, I did not even know there was a locking tab involved when I removed it. I pulled on the cable, rather firmly, and it came out. I just took a look at it, where would the tab or tabs be located. Perhaps they are still in the locked position


The socket has a tab that goes around the cable, here is the diagram on ifixit as to how these work:


Nice save +


Adicionar um comentário

Thanks, that's it.


Esta resposta foi útil?

Pontuação 0


Glad to help.


Adicionar um comentário

Adicionar a sua resposta

Charl será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 1,178