Ir para o conteúdo principal

Mid 2009 Model A1278 / 2.26 or 2.53 GHz Core 2 Duo processor EMC 2326

745 Perguntas Visualizar todos

MacBook won't turn on with isight / airport connected to logic board

Hello. I've been given a Macbook Pro where, it seems, the Airport cable was connected backwards. It was turned on, smelled funny, and was turned off. Now, when the cable for the isight / airport is attached to the logic board the system won't start at all. Remove the cable, it runs fine, but without isight or airport.

Any ideas? Is it the logic board, isight, airport, the cable? Thanks!

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

1 resposta

Solução escolhida

Since it starts without the iSight, Airport cables you can rule out the logic board. The camera cable AFAIK is not near the bluetooth/airport connector. Try one connector - to the correct spot - insulate the other connector. I think you may have blown the bluetooth/airport card. When booted what does System Profiler:Bluetooth, then Network lastly Wi-Fi reveal about the state of your cards.

If this answer was helpful please remember to return an mark it Accepted.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

RN74 será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 625