I had to replace the dash key on my MBP but now it won't work anymore. I know I moved the rubber nub around a bit but it's still in place. but I read that the rubber nub is essential to the key working so I think it might be that. Is there anything I can do to fix it?
Esta é uma boa pergunta?
Rep: 116,3 mil
66
68
359
A key re-mapper app. could move this stroke to a lesser used key. You might also use the keyboard viewer as a work around. The placement of the nipple is essential as that's what compresses the "switch" on the keyboard.
If this Answer is helpful please remember to return and mark it Accepted.
Esta resposta foi útil?
ok thanks. so there's no physical way I can fix that? Sometimes the key always "gets hit" and there's a whole series of dashes that appear. So it's kind of working
You could try siliconing the nipple in the place it belongs... let it dry 24hrs before replacing the key.
Ok I'll try that. What can I do about keys not popping back up? Any tips there?
The "nipple" is the spring. If the key hangs and the nipple is there/good look at the scissors to see if they are unlinked (pop together to make an X hinge) or if one of them is broken/missing or not snapped into the key-plate.
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 911
2 comentários
Please expand upon "won't work"- won't strike or won't pop back up?
por originalmachead
It won't strike. The key itself pops up but nothing appears on screen
por jrath