Ir para o conteúdo principal

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548 Perguntas Visualizar todos

Will not recognize replacement hard drive

I went through the hard drive replacement guide step by step. I did everything according to directions. I did not have any parts left over at the end. My iMac will power on, but will not recognize the new hard drive I installed. I ran the Snow Leopard install CD because I wanted to restore from backup to the new hard drive. The install program ran from the DVD optical drive, but it simply cannot see the new internal hard drive. My original 250GB hard drive was made by Western Digital the new 500GB hard drive is a Hitachi Deskstar model. I have not yet attempted to replace the original and see what happens.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 2
Adicionar um comentário

1 resposta

Solução escolhida

When you boot from the installation disk, did you go to Utilities - Disk Utility and format the disk?

Esta resposta foi útil?

Pontuação 4

5 comentários:

I went to Utilities - Restore from Time Machine backup (or something of the kind).

por

Ok, I feel less than intelligent. Yes, I had to format the drive first. Thanks for the help.

por

No problem, glad to help.

por

Thank you for this too. I'm glad you had this problem and posted the solution. Didn't know I had to format it before it would see it!

por

Adicionar um comentário

Adicionar a sua resposta

markbradley será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 3,280