little ribbon guard mainboard

Question

Reparo iPhone 4

iPhone de quarta geração lançado em 2010. O reparo é simples, mas o vidro frontal e o LCD devem ser substituídos juntos, como uma unidade. GSM / 8, 16 ou 32 GB de capacidade / Modelo A1332 / Preto e Branco.

2375 Perguntas Visualizar todos

Pergunta encerrada

mirko @mirko97548

Rep: 47

2

8

Postado: 25 de jun de 2012

Opções

little ribbon guard mainboard

hi

I just reassembled an new display on my iphone 4 and unfortunately this little black ribbon guard on the top of the mainboard broke off(or is not inserted anymore)

Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.

can anybody tell me, where this piece has to be inserted??or what it is actually for??

thanks

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

3 respostas

Owen Cunneely @therepairgenius Rep: 7,1 mil The Repair Genius 24 29 7 · Answer 1 · 2012-06-25T09:22:27-07:00

Pergunta mais útil

Owen Cunneely @therepairgenius

Rep: 7,1 mil

The Repair Genius

24

29

7

Postado: 25 de jun de 2012

Opções

The black rubber piece is there to make sure that the ribbon cables for the display do not get creased and instead only bend at a certain degree. There is a little black grove on the rubber piece and that grove fits with the logic board. Its not meant to stay there and can easily come off so all you have to do is slip it back on to the top of the logic board. Here is a picture of it right above where it is put on the logic board: