Ir para o conteúdo principal

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Perguntas Visualizar todos

Strange behaviour of colors after lcd and digitizer replacement

Hello all!

I have problem with colors on my iPhone 3G 8GB black. Week ago i decided to replace digitizer on this phone, because it was in very bad condition. So i read few tutorials and saw some videos on youtube how to do it.

I ordered new digitizer from ebay with the tools. During the process i made a mistake and i damaged the lcd :-( because i am noob. So i went to the ebay and ordered a new lcd. When i got the LCD i finished the process without a problem. The lcd and colors was ok, everything was fine. But, after few days the display started to behave strange. I dont know how to describe it, but there is no colors, just white - but i can still recognize the icons, i can make calls, and write sms, but its very annoying. I tried reset (home button + power button for 10s) didnt help. I also tried another lcd - > same colors, same problem.

Today morning when i wake up and look at the phone, the colors was almost good, but after i slide the unlock bar, the colors came back.

So i think its motherboard problem? Or what can i do now?

http://imageshack.us/photo/my-images/525...

http://imageshack.us/photo/my-images/7/d...

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
Adicionar um comentário

1 resposta

Solução escolhida

Roman, that looks like a bad LCD to me. Check by replacing your new screen with the old one, since it was just the digitizer that did not work.

Esta resposta foi útil?

Pontuação 1

3 comentários:

Thank you for reply, but I already tried the old LCD, it was same.

por

I am sorry, I was not aware of that, I did not see it in your original question. In that case you already answered your own question. If it is not the LCD, and not the connection, since you obviously already checked that as well, it would check the LM2512AA display interface IC. Hope this helps, good luck.

por

Thank you, i will buy new phone :-(

por

Adicionar um comentário

Adicionar a sua resposta

Roman será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 762