Ir para o conteúdo principal

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913 Perguntas Visualizar todos

broken iPod screen fell off

okay to start i have droped my ipod down the stairs the screen fell off and the backplate is messed up.Is it possibl to fix this type of damage if soo how much would it be?Please please please help me.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 4
2 comentários

The top part where the camera is fell off of mine. Does anyone know how to fix it? The screen doesn't work or anything!

por

my screen broke off and i dont know how to put it back on

por

Adicionar um comentário

3 respostas

Solução escolhida

You can do the repair yourself. The guide is available right here. Just familiarize yourself with it and do take your time. Follow the steps and be organized. The display assembly can be purchased from here When you talk about the backplate, and you should refer to the back of the iPod, that will be a bit trickier. Here is the teardown, it is not a guide, but will show you what you are up against if you want to replace it. If you are not sure if you want to do this by yourself, do a search with Google and see what the rate is for such a repair. Going rate seems to be around $90 for the repair. Hope this helps, good luck.

Imagem de iPod touch (4th Gen) Screen

Produto

iPod touch (4th Gen) Screen

$29.99

Imagem de iPod Touch 4th Generation

Guia

iPod Touch 4th Generation Teardown

Nível de dificuldade:

Moderada

Imagem de iPod Touch 4th Generation Front Panel

Guia

iPod Touch 4th Generation Front Panel Replacement

Nível de dificuldade:

Difícil

2 hours

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

You can buy a special kit online that will help you replace. Then look on YouTube for the guide to replace

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Replace the display and the bottom case. You may want to replace the battery, too. It is easier to assemble an iPod touch than perfectly disassemble and reassemble one. So on your old iPod, simply cut the battery and button control cables. Put new ones into the new case first, then put the logic board into it and solder the cables

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Vicente Martinez será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 7

Duração total: 7,471