Ir para o conteúdo principal

click wheel unresponsive: can I replace with 4th gen wheel?

I have a dead nano 4th and an unresponsive click wheel on a 5th.

Resets doesn't work (as no clicks at all).

Q1) Do 4th and 5th have compatible click wheels? Can I try to replace?

Q2) Any 'tricks' I should try before attempting to replace? (heard about a 'credit card' trick?

Thanks

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

1 resposta

Solução escolhida

albidani gaibazzi , no, it does not fit. The click wheel of the 4th is larger than the 5th and not as far recessed. Try to turn the hold switch off and on a couple of times. If that does not make a difference, you will have to replace it with the right click wheel. iPod Nano 5th Generation Click Wheel Replacement Hope this helps, good luck.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

albidani gaibazzi será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 911