Ir para o conteúdo principal

iPhone de quarta geração lançado em 2010. O reparo é simples, mas o vidro frontal e o LCD devem ser substituídos juntos, como uma unidade. GSM / 8, 16 ou 32 GB de capacidade / Modelo A1332 / Preto e Branco.

2375 Perguntas Visualizar todos

What part is this and where can I get it?

After the Power and Lock Button was not working anymore (does not 'klick' anymore) i decided to disassemble my iPhone to take a closer look because Apple said it cost about 200 Euro to repair and thats too much.

So i end up with this here:

http://www.picfront.org/d/8AI3

As you might see, the button itself is ok but the other 'thing' is broken.

i mean this part here

iPhone 4 Power & Lock Button Replacement

The part on Step 23.

So can anyone tell my which part this is and where i can get it?

(sry for my bad english, im from Germany :P )

Thank you.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
Adicionar um comentário

2 respostas

Solução escolhida

You will need the power button flex replaced, and the part on the step 23 is the power button holder/braket it should be still attached to the old flex that you replaced.

Search for iphone 4 power button flex

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Ok Thank you.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Jonas Sikorsky será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 357