Opções

power port on chassis loose

Hi.

The port to plug my ac adapter into is loose. whenever I go to plug it in, the plug always falls out. I've checked why, and it appears that I've broken the foundation it was attached to.

I can still charge, so that's not the issue.

What can I do to reconnect it to the "base" it's attached to, so it won't constantly fall out?

I'm guessing this has to do with opening the case, and getting down to the motherboard. As well as either some soldering, etc....

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação -1

3 comentários

Please give the last three figures of your serial number.

26 de mar de 2012 por mayer

the last 3 of the SN is

RJ7

26 de mar de 2012 por Steve

Apple PowerBook G4 1.5 12" (Al) Specs

Identifiers: 12-Inch - 1.5 GHz - M9690LL/A* - PowerBook6,8 - A1104 - 2030

27 de mar de 2012 por mayer

Adicionar um comentário

Postado: 27 de mar de 2012

Opções

The main problem is getting to the screw that holds the DC-IN board in place, here's the guide: PowerBook G4 Aluminum 12" 1-1.5 GHz DC-In Board Replacement

The screw is usually held in place with one screw and is covered by a piece of tape. It's about the last thing to be removed when tearing down this machine so you can actually superglue it into place along with using locktite to secure the screw.

Esta resposta foi útil?

Sim Não

Pontuação 2

Adicionar um comentário

PowerBook G4 Aluminum 12" 1-1.5 GHz

power port on chassis loose

1 resposta

Adicionar a sua resposta