Ir para o conteúdo principal

Lançado em junho de 2012, modelo A1278. Processador Intel com Turbo Boost, até 512 MB DDR5 de RAM vídeo

1633 Perguntas Visualizar todos

I spilled water on my mac.

About 10 minutes I accidentally knocked over my water onto my mac, its one of those insulation bottles and the water flowed from the opening onto the top right side of my macbook, near the powerbutton, the speakers and in the gap which allows the screen to fold. (Ifykwim).

I immediately flipped it upside down and shook it to get the water off then i flipped it back to dry the water with a tissue. After doing research I have the mac flipped upside down with the keyboard laying on a microfibre cloth.

Will it be fine? It still worked and I kept shutting it down because it kept turning on again if anything touched the keyboard. I shut it down 5 times and 2 times when i did the screen flashed pink before shutting off. I’m very paranoid, will it be okay? Is it going to stop working completely in a few days?? Is it going to end up not turning on again? 😭 Please I need to know, I’m genuinely so scared.

I also blew it for a minute or less with a fan but the fan died.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

1 resposta

Pergunta mais útil

@aurmazing time to disconnect the power. Disconnect your power supply and your battery Substituição da bateria do MacBook Pro 13" Monobloco de meados de 2012

After that you will have to treat it as you would any other water immersed device.

For now you want to stop using your computer. This potentially can make a bad situation worse.This may further damage your MacBook.

The next thing to do is to clean it. Disassemble your computer using these guides . You must remove all EMI shields from your logic board. After you removed those, clean the whole board, connectors and all with +90% isopropyl alcohol (higher grade if you can get it). Follow this guide , and even so it was written for an iPhone, all the points are still pertinent to your MacBook. While you clean your board, check for any obvious damage, like burned or missing components etc. All these steps are to avoid delayed failure caused by corrosion. Best thing to do would be to clean it with an ultrasonic cleaner, but if you do not have access to one, this will at least help. You also want to make sure you clean the MagSafe DC-in board. Once all this is done, reassemble your MacBook and reevaluate. Let us know how it works out and if there are any residual issues with your computer. Until it is cleaned, everything will only be a guess.

Imagem de iPhone

Guia

Repairing iPhone Liquid Damage

Nível de dificuldade:

Difícil

1 - 2 hours

Imagem de MacBook Pro 13" Unibody Mid 2012 Bateria

Guia

Substituição da bateria do MacBook Pro 13" Monobloco de meados de 2012

Nível de dificuldade:

Moderada

5 - 15 minutes

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

aurmazing será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 12

Duração total: 46