I have an Amana NTW4516FW3 top load washer. After the complete cycle is complete and machine shuts off there is a on/off clicking sound, like an on/off switch, coming from the Control Board. When the first click happens there is a green light in the board that comes on and when it clicks again it goes off. It wont stop so I have to unplug washer. Is the Control board bad?
Thanks,
C. McComb
Esta é uma boa pergunta?
Rep: 448,1 mil
11
366
1,4 mil
Hi,
This is the diagnostic LED which signals whether the incoming power supply to the machine is OK and that the outgoing power supply from the control board is also OK.
here's the tech sheet that may help.
Go to p.2 to view the DIAGNOSTIC LED – MAIN CONTROL information and then to p.12 TEST #1: Main Control to check if everything is OK or not.
Be safety aware when testing for the voltages as exposed lethal AC voltage is present. If you don't know what you're doing, then don't do it! Call a reputable, professional appliance repair service.
If the control board is faulty the part number is W11170317. Search online using the part number only, to find suppliers that suit you best.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 9
Últimos 30 dias: 40
Duração total: 719
