Ir para o conteúdo principal

Repair and disassembly information for the Samsung Galaxy Note20 Ultra Android smartphone. Released in August of 2020.

46 Perguntas Visualizar todos

Battery Connector Temp Sense Pads?

Hi there, I was wondering if the temp sense pads/tracks are essential to charging, powering and/or turning on the phone.

I am currently facing a similar situation as this (https://forum.xda-developers.com/t/help-...), where the battery connector has been burnt off.

Thank you.

Edit: The smaller, slimmer pins/pads could be generally known as signal pins. I'm asking about the middle four pins of the female component.

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
3 comentários

Burnt off? By what? Any pics of the board?

por

@strongbow it's this same pcb, just checking whether the 4 centre pins/pads are required; can't seem to find the Note 20 Ultra boardview Battery Power Connector Burnt Repair

por

@zacksg I'd say they're required. They wouldn't be there if they weren't. You might be fighting a losing battle.

por

Adicionar um comentário

1 resposta

Pergunta mais útil

The temp sensor is located on the wireless charging coil on these devices. If that sensor isn't connected or can't communicate with the device, it won't charge but it should still turn on as long as there aren't any other damage.

Esta resposta foi útil?

Pontuação 1

2 comentários:

@hootonberg Do you happen to know what are the smaller slimmer pads at the battery pin connector for then?

por

@zacksg my guess would be to communicate with the BMS board attached to the battery. There may be an additional temp sensor in there. But the BMS will monitor voltage, charge cycles, current, etc.

por

Adicionar um comentário

Adicionar a sua resposta

Zack Sg será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 14

Duração total: 141