Ir para o conteúdo principal

Released in May 2020, the 13" MacBook Pro features quad-core Intel 10th generation Core i5 and i7 processors, and Intel Iris Plus integrated graphics. (Model A2251/EMC3348 with four Thunderbolt 3 ports)

49 Perguntas Visualizar todos

MacBook erased, but won't boot after xartutil --erase-all comm

After erasing the MacBook, I also wanted to erase the Touch Bar. However, after the command

xartutil -erase-all

My MacBook does not start anymore. The screen no longer lights up or turns on. Tried all reset commands. How do I get him to work again?

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 0
Adicionar um comentário

1 Resposta

Pergunta Mais Útil

You'll need access to another TB Mack system to run the Apple Configurator 2 app to try to re-install the system firmware. Here's more on it How to install Apple Configurator 2 for macOS

Basically, putting the system into DFU mode

Try running both Revive and Restore options

Esta resposta foi útil?

Pontuação 1

2 comentários:

Thanks for the answer. When i erased the macbook it worked fine. but after the command xartutil-erase it is complete dead and i also get i not in DFU mode. is ther another solution maybe....?


@maxgeertsen - Your system uses firmware which is stored on the drive which you erased! What made sense in older systems creates issues with the newer models.

The other option is visiting an Apple Store who have a tech that can reload the firmware partition.


Adicionar um comentário

Adicionar a sua resposta será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 13

Últimos 30 dias: 52

Duração total: 272