Ir para o conteúdo principal

Released November 2018 as an edition to the iPad's Pro line. Model A1980.

62 Perguntas Visualizar todos

Do you think this repairable?

I didnt use enough heat to get the ambient sensor off and it separated.
I am getting the message that says Face ID cant activate, so I'm not sure if that's because of my installation is not right, or if its indeed because of the ambient sensor?

Can this even be repaired?
Attached is what the separation looks like from the sensor.

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

2 respostas

Pergunta mais útil

This cable is needed for FaceID to function. It may be repairable with micro-soldering, but it looks like the traces were ripped from the cable, so it would be very difficult.

Esta resposta foi útil?

Pontuação 1

1 comentário:

Bummer! I know that the sensors are paired to system board so my only option would be to micro solder..

thank you! I needed that confirmation!

por

Adicionar um comentário

If the pads have been ripped off then you probably have no chance. You might have to bite the bullet and go without face id. That or go down the expensive apple route.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Chris Weger será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 71