Conserte seus objetos Comunidade Loja

Released by Samsung in March 2016. Model SM-G930.

425 Perguntas Visualizar todos

Opções

Can't remove back back cover, adhesive too strong.

I have a Samsung Galaxy S7 and a iOpener and am unable to get the back glass off of it, I am heating the iOpener in the microwave for a minute and put it on the left side of the back glass for 3 minutes. After that I use the suction cup that came with the iOpener on the left side without touching the rounded edges. I am unable to get it open at all, not even so much that i can get something thin inside to pry it open.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

That microwave thing is a joke if I'm honest.

If you haven't got a heat plate, use a hair dryer.

Biggest friend removing the back glass, or any glued glass on a device, is a drop of isopropyl. Softens the adhesive up lovely paired with heat.

Just a couple of drops now and then, it'll evaporate out, but too much, can cause other issues.

Esta resposta foi útil?

Sim Não
Pontuação 3

2 comentários:

I will try a heat plate with a drop of isopropyl, gonna get back to you to see if that helped (hopefully) tomorrow!

por

Best of luck.

It's a sped up video of one of my repairs, but similar process.

You'll need a bit more heat with the sucker pulling up initially, as the glass is sunk in. When you start, don't go too fast, nice and gentle.

https://youtu.be/GvS1mI-aHQ4

por

Adicionar um comentário

Adicionar a sua resposta

Henrik Müller será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 10

Últimos 30 dias: 22

Duração total: 653