Ir para o conteúdo principal

Modelo A1502 / processador 2,4, 2,6 ou 2,8 GHz de dois núcleos / Lançado em outubro de 2013

552 Perguntas Visualizar todos

MacBook Pro late 2013 wifi no hardware installed

Hello, I got a late 2013 MacBook pro, A1502 emc2678, that works almost perfect but it says WIFI: no hardware installed. I looked inside and saw that the coax connector was torn off on the airport card so I replaced that but even after replacing the card it stills has that same error. I don’t know if the cables are damaged as well or if the logic board is.

Here is a link to the images of the mac: https://imgur.com/a/fccIbiV

Block Image

Block Image

Block Image

Block Image

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0

1 comentário:

Can you post some pics so we can see the damage Adicionar imagens a uma pergunta já existente

por

Adicionar um comentário

1 resposta

I do see a bit of tarnish on the contacts that should be cleaned. Find a fresh (still soft) pink pencil eraser. Carefully wipe the contacts in the direction of the pins, then wipe down the surface with a damp lintless cloth with 90% or better isopropyl alcohol (reagent quality) see if they helps. otherwise I think you need a new AirPort board.

I don’t see anything wrong with the cables did the connector pop off? If it did you might have a short or not a good connection.

MacBook Pro 13" and 15" Retina (Late 2013-Mid 2014) Airport/Bluetooth Board and the guide MacBook Pro 13" Retina Display Late 2013 AirPort Board Replacement

Imagem de MacBook Pro 13" and 15" Retina (Late 2013-Mid 2014) Airport/Bluetooth Board

Produto

MacBook Pro 13" and 15" Retina (Late 2013-Mid 2014) Airport/Bluetooth Board

$49.99

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Jake Briggs será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Duração total: 111