Trackpad physically clicks but isn't responding

Question

MacBook Pro 13" com tela Retina - Final de 2013

Modelo A1502 / processador 2,4, 2,6 ou 2,8 GHz de dois núcleos / Lançado em outubro de 2013

552 Perguntas Visualizar todos

jaded x @jadedx

Rep: 1

Postado: 17 de out de 2021

Opções

Trackpad physically clicks but isn't responding

My MBP has been having this issue for a while now. I even took it apart to check to see if the battery is swollen but that’s not the case here. I’ve done a PMC reset too, didn’t do anything.

My trackpad at one point was getting stuck and unable to physically click I managed to get it unstuck by pressing around the trackpad except it still doesn’t recognize or respond to the physical click.

I have tap to click enabled in the meantime to get by but would like to see if there’s a solution. I’ve read how many people were smacking/hitting their trackpad and that managed to fix it. Does anyone have the same problem before and how did you fix it?

Thanks!

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

1 resposta

Dan @danj Rep: 479,4 mil Self employed contract worker 35 329 971 · Answer 1 · 2021-10-18T05:03:02-07:00

Dan @danj

Rep: 479,4 mil

Self employed contract worker

35

329

971

Postado: 18 de out de 2021

Opções

The Click action is achieved via a physical blister switch which sits on the back side of the trackpad

So if the trackpad is not physically moving you likely had junk jamming the edge preventing it from moving. If the trackpad is moving then either the adjuster needs adjusting or the trackpad its self has failed. I’ll warn you its a big job! And I often also take the time to replace the battery as well as I’m sure your’s is getting to the end of its life. Let’s get a better view of things with your battery, install this gem of an app! CoconutBattery take a snapshot of the apps main window and post it here for us to see Adicionar imagens a uma pergunta já existente

In any case here’s the needed parts:

Here’s the guide to put both the trackpad and if needed a fresh battery Substituição do trackpad do MacBook Pro 13" com tela Retina Final 2013

I would follow the guide removing the trackpad so you can clean the edge of the case using some kitchen cleaner and a paper towel (wetting the towel) getting the grit and gummy mess off. Do the same on the trackpad edge as well but you want a fairly dry towel as you don’t want the cleaner to wick into the layers of the trackpad.

To adjust the click plate, carefully rotate this screw a quarter of a turn at a time as you don’t want to allow the screw to come out. Test things by pressing the Trackpad until you here or feel the click action of the switch.