Ir para o conteúdo principal

TI-84 Plus calculator support.

38 Perguntas Visualizar todos

Why does TI-84 Plus says Press Alpha F1-F4 to locate shortcut menus?

TI-84 Plus says Press Alpha F1-F4 to locate shortcut menus and can’t see the bottom portion of screen.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

2 respostas

Press 1 to dismiss permanently or 2 to just continue (message will pop up after calculator is turned off and back on)

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Like Rosa Avrigari said, to dismiss the menu press [1].

In addition to that, if you can’t see a portion of the screen then you’re likely experiencing ribbon cable failure. Unfortunately there’s nothing you can do to fix it without advanced soldering skills. There’s a guide over on the Cemetech (calculator forum) that addresses this: https://www.cemetech.net/forum/viewtopic...

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Tehani Buchanan será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 5

Últimos 7 dias: 5

Últimos 30 dias: 54

Duração total: 1,300