Ir para o conteúdo principal

Versão renovada do iPhone 3G com velocidades de processamento mais rápidas. O reparo deste dispositivo é semelhante ao do 3G e requer simples chaves de fenda e ferramentas de abertura. Modelo A1303 / 8 GB,16 GB ou 32 GB de capacidade / Parte traseira em plástico preto ou branco.

1500 Perguntas Visualizar todos

phone does not start properly after replacing rear panel and battery

I followed the 3GS replace rear panel / replace battery guide.

Once complete I tried to start, nothing happened.

I connected to laptop via usb. Phone screen is illuminated and apple logo appears for approximately 4 seconds, the switch off, and the same over again.

I assume without being aware I made a mistake in re-assembly, or even broke something during the action.

Does someone can advise what component / cable / connector might be affected?

Obviously the screen works, and something electrical works.

Thanks

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
Adicionar um comentário

1 resposta

Pergunta mais útil

1st I would just try to charge the battery thru wall outlet. Give it a couple of hours. Sometimes new batteries need to be charged.

Esta resposta foi útil?

Pontuação 2

1 comentário:

check the screw under and next to the "do not remove" sticker, they keep the motherboard in contact with the battery terminals.

por

Adicionar um comentário

Adicionar a sua resposta

Danyel Ceccaldi será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 516