Rep: 285
5
3
1
I'have changed the Magsafe board. Magsafe LED is green,
But no power
Reset SMC
connector keyboard ok
It's a MacBook 2009 white. I think that the keyboard does not function, and i dont find power connector on the logic board.
thank you for your help
Esta é uma boa pergunta?
Rep: 13,3 mil
45
21
11
Check the voltages at the battery connector using a multimeter or similar. The two outer pins are ground. The three inner ones should read something around 3,5 V. If the machine suffered a spillage have a hard look at the Magsafe -> board connector and also at the Board -> battery connector.
Esta resposta foi útil?
The 16.5 VDC, pinout is on the right side of this link: http://en.wikipedia.org/wiki/MagSafe
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 437
2 comentários
Please give us the last 3 characters of your serial number so we can verify your exact machine.
por ABCellars
It' a early 2009 the Keyboard was changed and the serial is on the Keyboard
por Mikhrych