Conserte seus objetos Comunidade Loja

The Mac Pro First Generation is an Intel Xeon-based workstation computer manufactured by Apple Inc. The first generation model includes the machines from 2006 through 2008.

317 Perguntas Visualizar todos

Opções

Re-Installing OS and Spinning Wheel Is Frozen

I was given a 2008 Mac Pro today. I put a hard drive in it, made a MacOS USB Drive and tried to install the OS. Upon booting from the USB, I’m greeted with the normal Apple screen. The spinning wheel shows up, spins a few times , stops and doesn’t proceed any further. I have tried zapping NVRAM, re-downloading and remaking Installation USB, tried different USB drives, swapped RAM modules and still the same. I am attempting to install OS Mavericks since I know it supports Early 08 and up.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0

7 comentários:

What is the drive you put in? Make & Model

por

It is a WD Blue 500GB

por

Is this the drive: WD Blue

por

It's an older WD Blue

por

@goetzsage2 - Can you give me the model number of the drive.

por

Exibir mais 2 comentários

Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas

Opções

Why I had asked is many people forget the older Mac Pro systems SATA ports can only support SATA II (3.0 Gb/s) or SATA I (1.5 Gb/s) drives. The newer fixed speed SATA III (6.0 GB/s) drive are not able run in your system directly. You would need a PCIe SATA board.

Are you able to setup the drive externally on your other Mac system using something like this: Universal Drive Adapter

Imagem de Universal Drive Adapter

Produto

Universal Drive Adapter

$24.99

Esta resposta foi útil?

Sim Não
Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

goetzsage2 será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 153