Pular para o conteúdo principal

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3272 Perguntas Ver todas

It is possible to change the Black digitizer mounting frame?

Hey there,

my digitizer mounting frame is damaged, because i dropped it. :-(

It is possible to change the digitizer mounting frame?

Exactly this one: http://cnn.cn/shop/apple-iphone-black-di... ?

Or is it bonded?

Thanx for help!

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

kits de reparo de baterias de iPhone

Only $29.99

Buy Now

kits de reparo de baterias de iPhone

Only $29.99

Buy Now

2 Soluções

Solução escolhida

It is possible but it is glued to the digitizer, the couple of times I have done it I have just patiently separated them with a very thin spatula, might be easier if you have a heat gun [set to low ;]]

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Are there any videos or step by step guides on this kind of repair? I have a few nicks and one or 2 chips on the mounting frame, but not the screen itself and I was looking to repair it myself if possible, but even in a complete teardown there is little info on replacing that part.

I much prefer my phone without a bumper to have to cover the unsightly chips/dents etc!

Any help is appreciated.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Viktor P será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 387