After replacing the display on my iPhone 7 Plus my phone is detecting touch input when nothing is happening. The display I replaced seems to be an original Apple part, and I have tried reseating the cables but I am still getting the phantom touches. Has anyone ran into this issue before?
Esta é uma boa pergunta?
Rep: 13,2 mil
18
11
44
This happens a lot when the cable is damaged during the repair, check to see if your cable has been pinched or damaged. If you don’t see anything you might have a defective display.
I'd suggest getting a replacement display assembly from the place you bought yours.
Esta resposta foi útil?
Thanks for all your help Michael! I am new to repair so I think I must have damaged the cable. I ended up ordering a new one from iFixit.com. This time I was much more careful and the repair was a success!
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 44
