After falling down the display is distorted. Connecting external screen provides full functionality. The hinge on the right side has more movement than one on the left side. Screen is holding up in any position and can be closed.
Esta é uma boa pergunta?
Rep: 479,3 mil
35
329
971
Ouch! The displays T-CON logic has failed. I bet you hit the bottom edge of the lid which is where the T-CON board is located in this series.
Sadly, the display is no longer made so all you’ll find is used displays and are becoming harder to find and also go for a pretty penny! Here’s one source 13” Retina MacBook Pro Display Assembly, Apple P/N 661-7014 But don’t wait to long as they tend to go quickly!
Here’s the guide to putting it in MacBook Pro 13" Retina Display Early 2013 Display Assembly Replacement
Esta resposta foi útil?
Thanks for the post and instruction!
@zk777 - Don't forget to accept the answer - Thanks!
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 107
2 comentários
Can you post a few pics so we can see the damage Adicionar imagens a uma pergunta já existente
por Dan
@danj
thanks for reaching out. I uploaded video and image.
por zk zk