Ir para o conteúdo principal

Model A1419 / Late 2013 / 3.2 & 3.4 GHz Core i5 or 3.5 GHz Core i7 Processor, ID iMac14,2

339 Perguntas Visualizar todos

Diagnostic LED flashes once, but PSU works

Essentially LED #1 flashes once, and then goes off. I’ve read a lot over it, and it seems like it would be a Power Supply issue. However, I have replaced said power supply, and been shocked by it (twice now) when trying to verify that all parts are working. I don’t have the current equipment to try and verify pin outs, as the multimeter leads have been burnt out. Now essentially I need verification that this is a fixable issue, but having no feedback when trying to diagnose this machine is becoming increasingly frustrating. So any feedback would be greatly appreciated

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

I’m thinking you have a short on the main logic board and/or the GPU MXM board.

You’ll need to get your meter working so you can make measurements.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

Connor Ware será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 27