power supply plug port loose in laptop

Question

Laptops Acer

A Acer entrou no mundo dos laptops em 1997, quando comprou a divisão de PCs móveis da Texas Instruments.

1682 Perguntas Visualizar todos

Pergunta encerrada

Mike @mike21172

Rep: 11

Postado: 14 de out de 2011

Opções

power supply plug port loose in laptop

Hello,

I own an Acer 5253-BZ660, and havent had to open it up yet, since buying it about 7 months ago. The yellow port for the power supply felt completely sturdy when I bought it. Now it feels significantly looser ("Rattles" side to side) as time has gone on. does anyone know if/where there is a guide to help with this specific task? Thank you for your time.. -M--

I'm also interested in replacing the internal speaker with one of better qualiy. This one still works a.t.m. Less popping sounds, and more volume are my intentions.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

1 resposta

Solução escolhida

oldturkey03 @oldturkey03

Rep: 782,2 mil

1,1 mil

893

2,3 mil

Postado: 14 de out de 2011

Opções

Mike, what you will have to do , is to disassemble your laptop. I do not have the 5250 series manual , but you can take a look at the 5220 on here. The power adapter is soldered on the mother board. See if one of the legs is loose or broken. You might get the part at Mouser.com or similar places. Should be straight forward solder job. As for replacing the speakers, you might have a bit more trouble. I do not believe that there is a big market for great internal speakers, so you may only get replacement speakers that are of the same sound quality. Check your caps on the sound card portion of your logic board to make sure the hissing and popping does not come from there. Consider some good external speakers to improve the sound and volume. Good Luck.

Esta resposta foi útil?

Sim Não

Pontuação 2

2 comentários:

Thank you very much for the response, and the guide. I was able to find the part number quickly. Hopefully there's nothing too tricky about opening it all up. This is my only computer at this time, and when I noticed the piece getting kinda wobbly I figured I should be ready to repair ahead of time. Thanks again, you were very helpful!!

14 de out de 2011 por Mike

You are welcome,thanks for accepting my answer. Let us know if you need any more help with it. Good Luck.

14 de out de 2011 por oldturkey03

Adicionar um comentário

Thank you very much for the response, and the guide. I was able to find the part number quickly. Hopefully there's nothing too tricky about opening it all up. This is my only computer at this time, and when I noticed the piece getting kinda wobbly I figured I should be ready to repair ahead of time. Thanks again, you were very helpful!! — Mike
You are welcome,thanks for accepting my answer. Let us know if you need any more help with it. Good Luck. — oldturkey03