Ir para o conteúdo principal

Having a hard time loading OS after newe 2TB SSD hard drive

I took my computer to a reputable Apple repair store and they determined the hard drive was bad. It was having an issue where it would have a black screen and after multiple attempts of updating the OS it would only go up to 10.7. Now that I installed the new 2TB SSD hard drive and updated temp sensor cable I’m having a hard time getting the computer to install the OS from the disc that came with the computer.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

First use Disk Utilities from the CD to format the new drive. Boot from the CD by holding down the C key on start up. Make sure your new SSD is backward compatible to SATA II 3 Gb/s.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

dane harmony será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 31